1. Ratings
G9SX
USER'S GUIDE
73
Ratings and Spec
ifications
Se
ct
io
n
4
1-2 Non-contact Door Switch Controller
Power input
Note:
Power consumption of loads not included.
Inputs
Note: 1.
Only applies to the G9SX-NSA222-T03-
@
. Refers to input other than that from the Non-contact Door Switch.
2.
Provide a current equal to or higher than that of the minimum applicable load of the connected input control device.
Outputs
Note: 1.
While safety outputs are in the ON state, the following signal sequence is output continuously for diagnosis.
When using the safety outputs as input signals to control devices (i.e. Programmable Controllers), consider the OFF pulse shown below.
2.
The following derating is required when Units are mounted side-by-side.
G9SX-NS202-
@
/G9SX-NSA222-T03-
@
: 0.4 A DC max. load current
3.
Apply the following rated load conditions for inductive loads.
IEC/EN 60947-5-1 DC13: 0.8 A
UL508 Pilot Duty: 0.5 A
Item
Model
G9SX-NS202-
@
G9SX-NSA222-T03-
@
Rated supply voltage
24 VDC
Operating voltage range
−
15% to 10% of rated supply voltage
Rated power consumption (See note.) 3 W max.
4 W max.
Item
Model
G9SX-NS202-
@
/G9SX-NSA222-T03-
@
Safety input (See note 1.)
Operating voltage: 20.4 VDC to 26.4 VDC, internal impedance: approx. 2.8k
Ω
(See note 2.)
Feedback/reset input
Item
Model
G9SX-NS202-
@
/G9SX-NSA222-T03-
@
Instantaneous safety output
(See note 1.)
OFF-delayed safety output
(See note 1.)
P channel MOS FET transistor output
Load current: 0.8 A DC max. (See note 2 and 3.)
Auxiliary output
PNP transistor output
Load current: 100 mA max.
ON
OFF
360
µ
s max.
Approx.100 ms
Summary of Contents for G9SX Series
Page 50: ...MEMO 50 G9SX USER S GUIDE ...
Page 95: ...G9SX USER S GUIDE 95 Precautions Precautions ...
Page 101: ...MEMO G9SX USER S GUIDE 101 ...
Page 102: ...MEMO 102 G9SX USER S GUIDE ...