Omron E5CS-U, User Manual

Page: 43 / 110

3.5 Setting the Set Point (SP)
3-7
Basic
Oper
ations
3.5 Setting the Set Point (SP)
The operation level is displayed when the power is turned ON. When
the
M
Key is used to light the SP indicator in the display, the set point
is displayed.
■
Changing the
SP
•
To change the set point, press the
U
or
D
Key while SP is lit on the
display, and set the desired set value. The new set point is selected
two seconds after the new value is specified.
•
The set point cannot be changed when the protect switch is ON.
• The setting window for the set point (SP mode) can be set as the
default window when the power is turned ON using the “PV/SP
display” parameter in the initial setting level (1).
Operating Procedure
In this example, the set point is changed from 0
°
C to 200
°
C.
1.
Display the set point (SP mode) using the
M
Key.
2.
Use the
U
and
D
Keys to set the set point to 200.
Process
value (PV)
M
SP mode
Set point
3
2
1 2 ALM ALM SP
OUT
0
1 2 ALM ALM SP
OUT
Power ON
0 2
1 2 ALM ALM SP
OUT
0
U
+
D