Simplicity on the Worksite
Solutions Guide for FAQs: E5
@
N
Using PID Control
3-3
Using PID Co
n
trol
You set this parameter in the Initial Setting Level. The parameter is set to reverse operation by
default.
(When finished, press the (Level) Key for at least 1 second to return
to the operation display.)
2
Setting direct or reverse operation.
Press the (Mode) Key
several times
to display
orev
(OREV).
←
orev
(OREV): Indicates the
Direct/Reverse Operation parameter.
←
Default setting is
or-r
(OR-R):
Direct operation
Initial Setting Level
Change the parameter with the Key.
1
Change the set value with
the (Up and Down)
Keys.
or-r
(OR-R): Reverse operation (default)
or-d
(OR-D): Direct operation
Summary of Contents for E5*N Series
Page 31: ...MEMO ...
