Simplicity on the Worksite
Solutions Guide for FAQs: E5
@
N
Setting Temperature Alarms
4-6
Setting T
empe
rature Alarms
You set this parameter in the Initial Setting Level. The parameter is set to 2 (Upper-limit Alarm) by default.
Step 2 Setting Alarm Parameters
1
Setting the Alarm Type
Press the (Level) Key
for at least 3 seconds.
Press the (Mode) Key
several times to display
alt1
(ALT1).
Operating Display
Change the set value with
the (Up and Down)
Keys.
Set the alarm type number that
you selected on page 4-3.
If required, use the (Mode) Key and the (Up and Down) Keys to repeat steps 3 and 4
and set alarm type numbers for
alt2
(ALT2) (Alarm 2) and
alt3
(ALT3) (Alarm 3).
(The number of alarms that is supported depends on the model of Temperature Controller.
Some of the alarm parameters may not be displayed.)
←
alt1
(ALT1): Indicates the Alarm 1
parameter.
←
Default setting is 2 (Upper-limit
Alarm).
Initial Setting Level
←
in-t
(IN-T) will be displayed to
show that the Initial Setting Level
has been entered.
Initial Setting Level
Initial Setting Level
←
Flashes 3 times.
Change the parameter with the Key.
3
Set the parameter with the Keys.
4
Turn ON the power supply.
1
Press the Key for at least 3 seconds.
2
(When finished, press the (Level) Key for at least 1 second to return to the operation display.)
Summary of Contents for E5*N Series
Page 31: ...MEMO ...
