Near-side threshold value
Far-side threshold value
Margin
Background (reference surface)
OFF
ON
ON
Margin
Teaching
4
・For output 1 (Pin4, black wire), 5 types of teaching are usable by button
operations.
・For output 2 (Pin2, white wire), teaching is not usable by button operations.
However, output 2 teaching can be executed by the communication
commands of IO-Link (only 2-point teaching and background teaching is
usable).
■Teaching operation lookup table
TEACH
T
TEACH
T
Item
2-point teaching
Press Quickly
Press Quickly
Press Quickly
TEACH
T
TEACH
T
Operation
TEACH
T
Item
*1. This is the factory setting.
When pressing quickly, it must longer than 25ms and shorter than 1s.
When pressing and holding, it must shorter than 5s.
Teaching Selection [Teach 3sec]
[Background] *1
[Object]
Background teaching
Object teaching
Press&Hold
Press&Hold
Operation
Item
Bg. Ref. Teaching Selection
[Ref. Teach]
[Normal] *1
[Sensitive]
Bg. reference teaching (normal)
Bg. reference teaching (sensitive)
Operation
■2-point Teaching
Basic Teaching
4-1
This is the basic setting.
1. Press the button quickly without any objects (longer than 25 ms and shorter than 1s).
・The threshold value is set at a distance between background and object.
・Maximum detection distance is set (threshold value is set with HL150□: 150
mm, HL500□: 500 mm as a teaching point) when teaching is performed with
either the first or second point without detected object or background.
・Shown above is applicable to the case of N.O. output logic. In the case of N.C.,
this is inverted.
TEACH
T
2. Press the button quickly with an object (longer than 25ms and shorter than 1s).
TEACH
T
BGS
OFF
ON
・[Single] is selected automatically as the output mode.
・Setting is no problem even if user operations with an object and without any
objects are performed inversely.
●Threshold setting after teaching is completed
Threshold value
Background
Threshold value
Background (reference surface)
Object
・This can be executed if setting [Background] when executing Teaching
Selection in "6 Detailed Settings"( page 9)
([Background] is the factory setting.)
・This is suitable for detection of an object from which small amount of light is returned to
the receiving surface (such as mirror, uneven, and low reflectance).
・
This teaching can be executed if setting [Normal] when executing Background Reference
Teaching Selection in "6 Detailed Settings" ( page 9)([Normal] is the factory setting.)
■Background Teaching [Teach 3sec (Background)]
■Background Reference Teaching (Normal) [Ref. Tech (Normal)]
Use to detect an object closer than the background.
Use to detect something shaped complicatedly.
Alternate
lighting
Alternate
lighting
●Threshold setting after teaching is completed
1. Press and hold the button without any objects (longer than 1s and shorter than 5s).
Release the button when [Background Teach] is displayed on the display
TEACH
T
BGS
・[Single] is selected automatically as the output mode.
2. Press and hold the button without any objects (longer than 1s and shorter than 5s).
Release the button when [Reference (Normal)] is displayed on the display
TEACH
T
・[Window FGS] is selected automatically as the output mode.
1. Press the button quickly without any objects (longer than 25ms and shorter than 1s).
TEACH
T
(FGS)
Margin
OFF
ON
・The threshold value is set on the near side to the background.
・If teaching is executed without any backgrounds, the maximum detecting
distance (HL150□: 150mm, HL500□: 500mm) will be set as the threshold
value.
・Margin is set automatically to the optimal value according to the detecting
distance.
・Shown above is applicable to the case of N.O. output logic. In the case of N.C.,
this is inverted.
●Threshold setting after teaching is completed
・The threshold value is set with ± margin to the background.
・Margin is set automatically to the optimal value according to the detecting
distance.
・Shown above is applicable to the case of N.O. output logic. In the case of N.C.,
this is inverted.
5