External input can be selected from the menu setting screen.
External Input in "6 Detailed Settings" ( page 8)
The external input of "Output 2 Function" cannot be used in IO-Link mode.
Various teaching can be executed within as much time as spent for
button operations."4 Teaching" ( page 5 to 6).
The detected value when zero reset is executed is set to "0."
External Input
3-3
OUT indicator
Displays output state
of output 1 (Pin4, black wire).
Zero reset indicator
Turned ON when the zero reset
function is enabled.
■Lase OFF
■Teaching
■Zero Reset
●Zero reset cancel
●Zero reset execution
■Other button operations
■How to switch to each screen
Teaching execution
Zero reset execution
Zero reset cancel
Key lock execution/cancel
"4 Teaching"
( page 5)
"5-1 Key Lock"
( page 7)
"5-3 Zero Reset"
( page 7)
Menu setting screen
"6 Detailed Settings" ( pages 8 to 9)
Main screen
Press and hold
for over 3s
Press for less
than 1s
or
Threshold value setting screen
"4-4 Threshold Value Manual
Operations" ( page 7)
Operation
Simultaneously
for over 3s.
Simultaneously
for over 3s.
Simultaneously
for over 3s.
+
+
+
+
Reference
UP
UP
UP
DOWN
DOWN
DOWN
DOWN
TEACH
T
TEACH
T
TEACH
T
TEACH
T
Input
External input ON
ON ＜ 15ms
External input OFF
External input OFF
Emission
Emission
OFF
ON
OFF
ON
OFF
Laser
OFF ＜ 25ms
Input
External
input ON
External
input ON
25ms < ON < 3s
External input OFF
External input OFF
External input OFF
External input OFF
Output before zero reset execution
Output after zero reset execution
Output before zero reset execution
Output after zero reset execution
ON
OFF
Output1
Input
Output1
Sensor response time
Sensor response time
3s ≦ ON
ON
OFF
Settings
3
Operation/Display Lookup Table
3-1
■Name and function of each part
■Main screen
Threshold value indicator
Displays the set value of the threshold
value in [mm]*1.
Detected value
Displays the current detected value in [mm]*1.
［TEACH］button
・Executes various
teaching.
[UP] button
・Changes the
threshold value or set
value.
[DOWN] button
・Changes the
threshold value or set
value.
・To switch between
the main screen and
menu setting screen,
press and hold this
button for over 3s.
T
Indicator's role is different
depending on the sensor state.
OUT indicator
Displays input/output state of output 2
(Pin2, white wire).
Power & Communication
indicator (green)
Operation indicator
(orange)
MODE
3sec
MODE
3sec
The function assigned to output 2 (Pin2, white wire) can be selected.
The output 2 fanction can be selected from the menu setting section.
Output 2 function in”6 Detailed Settings”( page8)
*1. Output 2 turns ON when a system error or load short circuit error
occurs.
Output2 Function
3-2
Menu display
Out1 Invert
Out2 Single
Input
Error
Function
Output 1 Invert
Output 2 ［Single］
External Input
Error Output *1
Laser emission is turned OFF. When the laser emission is stopped, the
intensity is insufficient.
Output1
Output2
OFF time ON time
OFF time ON time
External Input
3
Error Output
Normal Inputting
Setting
*1. Reference value
MODE
3sec
Screen display
Item
Time elapses without operation
