61
Cables, Connectors, and Related Devices
Section 2-3
2-3-9
Communications Power Supply
In a DeviceNet system, a 24-V DC communications power supply must be
supplied to the Network. The communications power supply must meet the
specifications listed in the following table and the AC inputs and DC outputs
must be isolated.
The OMRON S82J-series and S82K-series Power Supply Units are recom-
mended. Select a Power Supply Unit with a current capacity that can comfort-
ably handle the total power consumption of all connected nodes and allow for
future expansion if necessary.
Communications Power Supply Specifications
The communications power supply must meet the following specifications.
DRS3-1
Shielded Mini-size Connector with Terminating Resistance
(male plug)
DCN4-TM4
Used to connect the DCN4-TR4-1.
DCN4-TP4D
Flat Cable Power Supply Terminal Block with Terminating
Resistance
When flat cable is used, communications power can be sup-
plied from the terminals on this terminal block.
Model
Remarks
Item
Specifications
Output voltage
24 V DC
±
1%
Output current
16 A max.
Input fluctuation
0.3% max.
Load fluctuation
0.3% max.
Temperature effect
0.03%/
°
C max.
Input voltage
100 to 1,200 V
Input frequency
47 to 450 Hz
Output ripple
250 mVp-p
Output capacitance
7,000
µ
F max.
Ambient temperature
Operating:
0 to 60
°
C
Storage:
−
40 to 85
°
C
Max. instantaneous output
current
65 A max. (peak)
Overvoltage protection
Must be provided.
Overcurrent protection
Must be provided. (max. current: 125%)
Startup time
Must reach 5% of final output voltage within 250 ms.
Startup overshoot
0.2% max.
Insulation
Between output and AC power and between output
and chassis ground
Standards
Required: UL
Recommended: FCC Class B, CSA, TÜV, and VDE
Summary of Contents for DEVICENET -
