57
Cables, Connectors, and Related Devices
Section 2-3
DCN1-3C T-branch Tap Components
DCN1-2C and DCN1-2R T-branch Tap Components
2-3-5
Shielded T-branch Connectors
Use a T-branch Connector when a T-branch is required in a Network that has
communications cables with shielded connectors.
Note
1.
If the T-branch Connector is at the end of the trunk line, the trunk line can
be terminated by connecting a shielded connector with Terminating Resis-
tance. (Male plug and female socket terminators are available.)
2.
When the Network is powered by a single communications power supply
and the current consumption is within the T-branch Connector’s specifica-
tions, the communications power supply can be connected to a T-branch
DCN1-3C
T-PORT TAP
Mounting screw holes
Use when screwing the T-
branch Tap to a control
panel.
Terminating Resistor socket
Connect a Terminating
Resistor here if the T-branch
Tap is installed at the end of
the trunk line.
Communications Connectors
Connect the network communications cables to the provided XW4B-
05C1-H1-D Straight Connectors.
Communications Connectors
Connect the network communications cables to the provided
XW4B-05C1-H1-D Straight Connectors.
DIN Track mounting hooks
Use when mounting the Tap to a DIN Track.
DCN1-4
T-PORT TAP
Mounting screw holes
Use when screwing the T-
branch Tap to a control
panel.
Terminating Resistor socket
Connect a Terminating
Resistor here if the T-branch
Tap is installed at the end of
the trunk line.
Communications Connectors
Connect the network communications cables. The following connectors are provided.
DCN1-4C: XW4B-05C1-H1-D Straight Connector with attachment screws
DCN1-4R: XW4B-05C1-VIR-D Right-angle Connector with attachment screws
Communications Connectors
Connect the network communications cables. The following connectors are
provided.
DCN1-4C: XW4B-05C1-H1-D Straight Connector with attachment screws
DCN1-4R: XW4B-05C1-VIR-D Right-angle Connector with attachment screws
DIN Track mounting hooks
Use when mounting the Tap to a DIN Track.
Summary of Contents for DEVICENET -
