A
A-2 Instructions
SYSMAC CP1L Getting Started Guide
101
Ap
pend
ix
A-2 Instructions
CP1L has a rich instruction set. This section explains how to use the instructions, and gives some basic
instructions.
A-2-1 Using Instructions
With previous PLCs, from C-series to micro PLCs, instruction sets were designed
with the primary focus on handing BCD data. However, as data size grow and
exchange of data between computers becomes more commonplace, however,
support for BIN data has become a necessity for control equipment, as well.
In response to such needs and for greater convenience, many of the instructions for
handling BIN data have been added in the process of creating the CP-series.
Note
For a list and explanation of the instructions, refer to the CX-Programmer Help.
For details on using the CX-Programmer Help, refer to
4-4 Using the Help
.
Notation for Instructions
z
Instructions and Function Numbers
In this section, special instructions, which have a function number assigned are
displayed as a mnemonic followed by a 3-digit function number in parenthesis. E.g.
MOV(021).
W07E-EN-02+CP1L+GettingStartedGuide.book Seite 101 Montag, 15. September 2008 11:15 11
