Omron Colin BP-203RPE III Manual Download Page 19

Page: 19 / 152

1-6. Name and Function of Each Part

Main Unit

Enter patient information, configure settings, and perform measurement.

Top

Back

1. LCD display (touch panel)

When configuring settings: Setting buttons appear.
Touch the setting buttons with the touch pen to enter
settings.
During measurement: Measured values, measured
waveforms, and operation buttons appear.

2. Jog dial

Settings can be entered using the jog dial.
Turn the jog dial right or left to select an item and
press to enter.

3. Display lamps

Off: Power is off
Green (on): Power is on (normal mode)
Orange (on): Power is on (sleep mode)

4. [START] button

Press to begin measurement.

5. [STOP] button

Press to interrupt and stop measurement.
On the screen with the [BACK] button, the [STOP]
button can be also used to return to the previous
screen.

6. Brightness button

: This enables the "-" and "+" brightness buttons.
: This darkens the screen.
: This makes the screen brighter.

7. Power on/off switch

Turns the power on and off. The power is normally
turned on and off with the power switch on the stand,
so keep the main unit power switched on.

8. Connectors

For details on the connectors, see Chapter 5.
Refer to "5-3. Connections" (page 127)

BP-203RPE3(A).fm 17 ページ

９年

月

６日　土曜日　午後５時４

分

Summary of Contents for Colin BP-203RPE III

























































































































































Search results

Summary of Contents for Colin BP-203RPE III

Reviews:

Related manuals for Colin BP-203RPE III

Brands by name

Popular brands

Omron Colin BP-203RPE III, Manual

Search results

Summary of Contents for Colin BP-203RPE III

Reviews:

Related manuals for Colin BP-203RPE III

Brands by name

Popular brands