![background image](http://html1.mh-extra.com/html/omron/c500-asc04/c500-asc04_operation-manual_743033122.webp)
Appendix B
Specifications
113
3. If the LPRT receives the &H0A (LF), &H0B (HM), &H0C (CL), or &H0D (CR) code. &H0A (LF) will be
added to the code and output. Any other code will be stored in the buffer and when the number of charac-
ters of the stored codes reaches 80, &H0A (LD) will be added to each of the codes and output. When the
CLOSE instruction is executed, the port will close after all remaining data in the buffer is output.
4. A cursor shift code corresponding to the present display position is output and the cursor is shifted one
character to the left.
5. The ASCII Unit outputs &H0C (CR) added with &H0A (LF).
6. If the COMU receives codes &H00 to &H1F, in the case of the C500-ASC01/02, the code is output
immediately. Each code from &H20 to &HFF will be stored in the buffer and when the number of charac-
ters of the stored codes reaches 256, the codes will be output. In the case of the C500-ASC03/04, each
code is output whenever the buffer receives the code.
7. If Port 1 is opened by a peripheral device other than TERM, be sure to execute the CLOSE instruction to
stop the program. If key-in is not accepted from the terminal after the program stops, press the CTRL + X
Keys.
Summary of Contents for C500-ASC04
Page 1: ...C500 ASC04 ASCII Unit Operation Manual Revised February 2001 ...
Page 5: ...iv ...
Page 7: ...vi ...