Control and Status area
Section 3-2
32
3-2
Control and Status area
After initialisation of the Unit (RUN LED is ON), the control and status words
are exchanged between the PLC and the Unit during each I/O refresh. The
mapping of the control words and unit status words depends on the Machine
number set by the rotary switch at the front of the Unit.
The first word in the IR area allocated to the Unit will be indicated by IR n,
the last word by IR n+7. The following table gives an overview of the
meaning of these words.
IR word
Meaning
Data Direction
n
Control word
n+1
Reserved for CORT21-V1
PLC
C200HW-CORT21
n+2
Reserved for CORT21-V1
n+3
Status word
n+4
Reserved for CORT21-V1
n+5
Reserved for CORT21-V1
C200HW-CORT21
PLC
n+6
Reserved for CORT21-V1
n+7
Reserved for CORT21-V1
The data towards the C200HW-CORT21 are named the control words and
the data coming from the C200HW-CORT21 are named the status words.
Refer to the next two sub-sections for a detailed explanation of these words.
Machine
number
IR area
0
IR100 ~ IR107
1
IR110 ~ IR117
2
IR120 ~ IR127
3
IR130 ~ IR137
4
IR140 ~ IR147
All C200H PLC models
5
IR150 ~ IR157
6
IR160 ~ IR167
7
IR170 ~ IR177
8
IR180 ~ IR187
9
IR190 ~ IR197
A
IR400 ~ IR407
B
IR410 ~ IR417
All C200H PLC models except:
C
IR420 ~ IR427
C200HE,
D
IR430 ~ IR437
C200HG-CPU3
❏
-E/CPU4
❏
-E,
E
IR440 ~ IR447
C200HX-CPU3
❏
-E/CPU4
❏
-E
F
IR450 ~ IR457
Summary of Contents for C200HW-CORT21
