Omron C200HW-CORT21, Operation Manual

Page: 18 / 62

Overall Specifications
Section 1-1
16
1-1 Overall Specifications
Model code C200HW-CORT21
Host PLC system C200HE, C200HG, C200HX, CS1
C200HE
C200HG-CPU3
❏
-E/CPU4
❏
-E
C200HX-CPU3
❏
-E/CPU4
❏
-E
10
Maximum number of Units
per PLC system.
All others 16
Unit mounting position CPU Rack or Expansion I/O Rack
Unit cannot be mounted to SYSMAC BUS Slave Racks.
Current consumption Internal I/O power supply: 250 mA at 5V DC max. (from PLC)
Network power supply: 45 mA max. (from communications connector)
Network power supply
24 V DC
±
10%
In
s
ta
ll
a
ti
o
n
Weight 250 g
Storage temperature
-20 to +75
°
C
Operating temperature
0 to +55
°
C
Operating humidity 10% to 90% (non-condensing)
E
n
v
ir
o
n
m
e
n
t
Conformance to EMC- and
environmental standards EN50081-2
EN61131-2
Switch Settings Special I/O Unit number (0 ~ F) by rotary switch
Network baud rate (10 kbit/s ~ 1000 kbit/s) by 3 DIP-switches
U
s
e
r
in
te
rf
a
c
e
Indicators Unit status: RUN (green LED), ERR (red LED)
Network status: 2 x 7-segment display
No. of IR words
PLC
→
Unit: 3 words
Unit
→
PLC: 5 words
No. of DM settings 20 words
Amount of I/O data
per Unit CAN data is transmitted via IOWR PLC instruction and received CAN
messages are transferred during the I/O refresh. Max number of words
transferred during I/O refresh is 91 words.
P
L
C
i
n
te
rf
a
c
e
Message communications Via IOWR / IORD instructions
Bus connector
5-pin male open style connector
Node address N.A.
Baud rate 10, 20, 50, 125, 250, 500, 800, 1000 kbit/s
(note: Refer to section 3-1-1 for the configuration of any arbitrary baud rate via
the DM settings.)
N
e
tw
o
rk
in
te
rf
a
c
e
CAN interface ISO 11898, High Speed CAN.