17
tions Board. Refer to 3-1-9 Mounting a Communications Board for the
mounting methods.
2-2-2 Memory Cassettes
Memory Cassettes can be optionally mounted to increase memory capacity
over just the built-in RAM. There are two types of Memory Cassette available.
These are shown in the following diagram.
Notch
C200HW-ME
EEPROM Memory Cassette
EPROM Memory Cassette
EEPROM Memory Cassette
When an EEPROM Memory Cassette is installed in the CPU Unit, the user
memory (UM) and I/O data can be directly read and written. There is no need for
a backup power supply. The Memory Cassette can also be removed from the
CPU Unit and used for storing data.
Model
Capacity
C200HW-ME04K
4K words
C200HW-ME08K
8K words
C200HW-ME16K
16K words
C200HW-ME32K
32K words
C200HW-ME64K
64K words
Note The C200HW-ME64K can be used with the C200HX-CPU65-ZE/CPU85-ZE
CPU Units only. It cannot be used with other CPU Units.
EPROM Memory Cassette
With an EPROM Memory Cassette, the program is written using a PROM Writer.
The ROM is mounted to the Memory Casette and then installed in the CPU Unit.
I/O data cannot be stored.
Model
Capacity
C200HS-MP16K
16K words/32K words
Memory Cassette Settings
EEPROM Memory Cassette
Set the DIP switch. For an EEPROM Memory Cassette, set pin no. 1 (write pro-
tect) to either ON or OFF. Setting it to ON will protect the program in the memory
from being overwritten. Setting it to OFF will allow the program to be overwritten.
(The factory setting is OFF.)
EPROM Memory Cassette
For an EPROM Memory Cassette, set pin no. 1 (ROM Type Selector) according
to the type of ROM that is mounted.
Pin no. 1
ROM type
Model
Capacity
Access speed
OFF
27256
ROM-JD-B
16K words
150 ns
ON
27512
ROM-KD-B
32K words
150 ns
Units
Section 2-2