![background image](http://html1.mh-extra.com/html/omron/bw100t/bw100t_instruction-manual_744594056.webp)
8 Using the UPS monitoring software
8-2 How to use the UPS monitoring software
BW40T/BW55T/BW100T/BW120T
56
Auto restart after OS closing processing using the UPS monitoring software
When a power failure occurs, certain PCs (*1) automatically restart immediately after the
OS is shut down by auto shutdown.
In this case, the UPS stops during or after the restart of the PC, which may damage files
and the hard disk.
You can avoid this phenomenon by disabling POWER MANAGEMENT in the BIOS
settings of the PC.
*1) Certain PC: It is known that this phenomenon occurs for MICRON's Millennia Mme.
Precautions when “setting the UPS to stop automatically” after OS shutdown
If, after a power failure occurs, the power is restored while auto shutdown processing is
being performed, UPS output stops once after the set time elapses. After shutdown
processing is complete, do not turn ON the computer until the UPS has finished
restarting.