3 Basic operations including running and stopping the unit
3-1 Basic operations including running and stopping the unit
BW40T/BW55T/BW100T/BW120T
26
3-1-3 Action in the power failure
- When a power failure or an abnormal input power occurs, the unit automatically
switches to the battery mode and continues the power output from the "power output"
outlet with the electricity sourced from the battery.
- In Battery mode, the following icons are displayed.
3-1-4 When recovered from the power failure
- While the power output is from the battery mode, the unit automatically returns to the
output from the commercial power supply as soon as it recovers from the power failure
or abnormal power. The battery starts automatic charging.
- Once the battery runs down completely, the UPS’s power output stops. Then, the UPS
automatically restarts and starts supplying power again the moment it recovers from
the power failure or other abnormal input power states. The consumed battery is
charged automatically.
R
EFERENCE
You can enable/disable automatic restart on "Setting" screen (refer to P.
30.)
3-1-5 How to stop the operation
Press "Power" button for three or more seconds in power ON state.
- Power output stops.
- Even in power OFF state, the battery is automatically charged as long as the
commercial power supply is available.
3-1-6 Pausing the beep sound
The activated beep sound pauses by pressing "Stop buzzer/Enter" button.
R
EFERENCE
You can enable/disable beep sound on "Setting" screen (P. 30.)