![background image](http://html1.mh-extra.com/html/omron/bw100t/bw100t_instruction-manual_744594055.webp)
8 Using the UPS monitoring software
8-2 How to use the UPS monitoring software
BW40T/BW55T/BW100T/BW120T
55
8
1.
Connect the UPS to a computer.
Cable: Included connection cable (USB)
2.
Install the included “PowerAct Pro,” “Simple Shutdown Software” or “Power
Attendant Lite” to the PC you want to shut down.
Installation method: See the manual for the above software.
Visit our website to download the manual for this software:
http://www.omron.co.jp/ese/ups/support/download/download.html
8-2-4 The setting of the UPS monitoring software
Scheduled operation using the UPS monitoring software
When performing scheduled operation in which the UPS is stopped and a device such as
a breaker is used to stop the UPS at the same time that commercial power stops, specify
a period of no more than 3 months for the start of the next operation.
If you specify a period longer than 3 months, the internal timer is reset and the scheduled
operation does not start.
Note that this period reduces to approximately half when the battery is dead.
If a period of 3 months is exceeded, you start operation by supplying commercial power
and pressing the power button. However, if the battery is dead, you may not be able to
start operation. In this case, replace the battery according to “7-2Replacing the battery"
on page39.
Start of operation in scheduled operation using the UPS monitoring software
To manually start up this unit after it has been stopped by a scheduled operation, turn
OFF the power button and turn it back ON again.
To stop the unit when it is in operation, turn OFF the power switch.