Safety Precautions
BW40T/BW55T/BW100T/BW120T
14
Compliance
Do not install or store the UPS in the place exposed to the direct
sunlight.
+ The internal battery may deteriorate due to the temperature surge that may result
in dysfunction.
Turn off the UPS power before switching off the commercial power
supply.
+ Once the commercial power supply stops, it switches to the backup operation. If
the frequency of backup operation becomes high, the battery life may be
significantly reduced.
When connecting the UPS with the inductive equipment, such as coils,
motors, transformers, make sure of checking the operation beforehand.
+ Some types of equipment may prevent the normal operation of the UPS due to
the inrush current, etc.
The UPS will not start up unless until the battery is connected.
+ Note that it also does not start in an over-discharge state or the state where the
degraded battery is connected.
Do not run the withstand voltage test.
+ The power supply input line contains the surge absorbing elements, which are
subject to destruction with the withstand voltage test.
+ Execute the insulation resistance within the range of DC 250V.
Make sure of all documents are attached to the UPS before transferring
or selling the UPS to a third party. The UPS shall comply all the
conditions stated in the attached documents.
+ This instruction manual contains the details instructions for assuring safety. Read
them carefully before start using the UPS.
Contact the store of purchase if you lost the instruction manual.
+ This unit uses lead acid batteries.
The lead acid batteries are precious recyclable resources. Please
cooperate recycling.
For more details about recycling, contact Omron Electronics
Replace Center, or
download the application form for the replacement service from our
website,
fill the required fields and send it to
our Replace Service Center.
Pb
