6 Contact signal
6-1 Contact signal
BU5002R/BU3002R/BU3002RH
115
6
6 Contact signal
6-1 Contact signal
Contact signals are provided as standard for the UPS.
6-1-1 Contact signal
You can develop your unique system based on the following specifications to automate the
process at a power outage.
You can perform power-failure processing by allowing the system to detect the backup
signal and also perform system shutdown processing by allowing the system to detect the
low battery level signal. Also, by inputting the backup stop signal from the system, you can
stop the UPS with a sufficient battery level to prepare for the next occurrence of a power
outage.
On this UPS, the standard contact signal I/O port and the optional relay output type contact
I/O card (SC08) contact signal input output can be used.
