Omron BA100R, Instruction Manual, Page: 34 / 104

2 Installation and connection
2-3 Connecting the AC input
Load Isolator switch or circuit breaker
with 15A/125VAC (BA100T/BA100R),
10A/125VAC (BA75T)
External breaker
with 15A/AC125V (BA100T/BA100R) ,
10A/125V (BA75T) (double pole)
Power supply
100VAC
100VAC (Example of connection) * When in use, make sure the terminal block
cover is attached.
Caution
To reduce the risk of fire,
● Connect only to a circuit provided with 15A (for BA100T/BA100R), 10A (for BA75T)
maximum branch circuit overcurrent protection in accordance with the National
Electric Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1
● Disconnect switch shall be provided by others for AC output circuit.
Reference
●
The unit was charged before shipment, but it may have self-discharged during shipment,
resulting in a reduced backup time. We recommend charging the unit before use.
● You can perform "3-2 Checking the operation " also before charging the battery.
● When you use the input power cable
When you use the input power cable for connecting to a commercial power source, use the
input power cable (BAX15NP) included with the rated product. For connecting procedure,
refer to “2-3-1 Connecting to the input terminal block”.
Input power cable (BAX15NP)
Commercial
power source
(When you use the input power cable)
Installation and connection is now complete.
BA75T/BA100T/BA100R
33
2