Omron A2W-R**-WC1 Series, User Manual

Page: 80 / 96

7 Run in the RUN Mode
7 - 2 Wireless Pushbutton Switch User’s Manual (A265)
7-1 Operation
This section describes how to actually operate the wireless pushbutton switches system.
In RUN mode, you can perform actual wireless communications. Use this mode for regular operations.
 Operation Procedure Flowchart
Start
<Master Unit>
1. Set the mode
settings switch
to "RUN".
2. Press the
pushbutton.
<Slave buttons>
Lit red
Failure
4. The output LED
lights in yellow.
At the same
time, output
from the output
terminal will be
performed.
5. The RCV LED
is turned.
(Example: OUTPUT 1 will light in yellow.
At the same time output No. 1 will turn on for
0.5 seconds)
Completion
3. Reception
confirmation
LED is lit.
Lit green: Received field strength is "Strong".
Lit yellow: Received field strength is "Weak".
Green lighting or
yellow lighting