Omron A2W-R**-WC1 Series, User Manual

Page: 77 / 96

6 - 3
6 Wireless Test in the TEST Mode
Wireless Pushbutton Switch User’s Manual (A265)
6-1
W
ireless T
est
6
 Procedure
1
Set the "mode settings switch" of the Master Unit to "TEST" (TEST mode).
2
Press the Slave button that you want to test.
3
When the Slave button is pressed and if transmission and reception with the Master Unit is
successful, the reception confirmation LED of the Slave button will light green.
Note Yellow lights up when reception sensitivity falls, and red will light when transmission or reception
fails.
4
The output LED (e.g., OUTPUT 1) of the Master Unit will turn yellow for 0.5 seconds.
(The output number 1 of the Master Unit remains OFF.)
Mode settings switch
TEST
Slave button
Lit green.
Slave button
OUTPUT 1 turns
yellow.
Output LED