Omron A2W-R**-WC1 Series, User Manual

Page: 66 / 96

5 Registration in the ID Mode
5 - 4 Wireless Pushbutton Switch User’s Manual (A265)
 Procedure
1
Set the "mode settings switch" of the Master Unit to "ID" (ID mode).
2
Set the "output settings switch" of the Master Unit to (e.g., 1).
3
The output LED (e.g., OUTPUT 1) of the Master Unit will turn yellow.
4
Press the Slave button you want to register 3 successive times within 3 seconds.
This assigns the ID of the Slave button to the output number of the Master Unit.
Note You can operate it more than three times.
5
The RCV LED of the Master Unit will light green for 3 seconds.
Note If registration fails, the Master Unit's RCV LED will flash green for 3 seconds.
6
Registration complete.
Mode settings switch
ID
Example 1
Output settings switch
OUTPUT 1 turns yellow.
Output LED
Operate three times within 3
Lit red
Slave button
RCV LED
Lit green