Omron A2W-R**-WC1 Series, User Manual

Page: 64 / 96

5 Registration in the ID Mode
5 - 2 Wireless Pushbutton Switch User’s Manual (A265)
5-1 How to Register Slave Buttons to
Master Unit
This section describes how to register/delete the Slave buttons to/from the Master Unit.
In ID mode, you can register Slave buttons to the Master Unit.
Precautions for Correct Use
• If you register a Slave button to the Master Unit in an environment where another wireless
pushbutton switch system is operating around it, it can be erroneously set. Therefore, when
registering a Slave button, perform in an environment where the system of another wireless
pushbutton switch is not operated.
• Register Slave buttons to one Master Unit one by one. Be sure to set the other Master Units
to the RUN mode or TEST mode.
If the power of the Master Unit drops due to an instantaneous power failure or the like while registering
the Slave button, the setting information may not be stored correctly in the Master Unit's memory. Then,
the Master Unit may not work properly at the next startup. When registering, perform it with stable
power supply status.