background image

Specifications

Description

OmniConverter 10G/S

Multi-gigabit/multi-rate copper to 1/10G SFP Media Converter

Standard Compliances

IEEE 802.3, 802.3bz

Environmental

RoHS, WEEE, REACH

Frame Size

Up to 10,240 bytes

Port Types

Copper: 10/100/1000BASE-T, 

 

2.5GBASE-T/5GBASE-T/10GBASE-T (RJ-45)

SFP/SFP+: 

10GBASE-X Fiber Transceivers,  

10GBASE-T Copper Transceivers

 

1000BASE-X Fiber Transceivers,  

1000BASE-T Copper Transceivers

 

10/100/1000BASE-T SGMII Copper Transceivers

 

10/100/1000/2.5G/5G/10GBASE-T Multi-rate Copper 

Transceivers

Cable Types

Copper: 

Twisted-pair cable up to 100 meters

 

10BASE-T: 

4-pair UTP Cat 3, 4, 5, 5e, 6, 6A

 

100BASE-TX:  4-pair UTP Cat 5, 5e, 6, 6A

 

1G/2.5G: 

4-pair UTP Cat 5e, 6, 6A, 7

 

5G: 

4-pair UTP Cat 6, 6A, 7

 

10G: 4-pair UTP Cat 6A, 7

Fiber:  

Multimode: 50/125, 62.5/125µm

 

Single-mode: 9/125µm

Dimensions 

W x D x H

4.8” x 6.0” x 1.75”  (121.92 mm x 152.4 mm x 44.45 mm) 

Weight

Module Only:            1.1 lbs.  (498.9 grams)
Module w/ Adapter:

   

1.6 lbs. (725.7 grams)

Operating Temperature

Commercial: 

0 to 50°C

Wide: 

-40 to 60°C   (-20°C AC cold start)

Storage: 

-40 to 80°C

Humidity 

5 to 95% (non-condensing)

Altitude 

-100m to 4,000m

MTBF (hours)

Module Only:        271,000

AC/DC Adapter:   100,000

Warranty

Lifetime warranty with registration and 24/7/365 free Technical Support

Regulatory Compliances

Safety: 

UL 62368-1*,

 

UL 60950-1*,

 

IEC 62368-1*,

 

IEC 60950-1*,

 

EN 62368-1*, 

 

EN 60950-1*, 

 

CAN/CSA C22.2 No. 62368-1-14*, 

 

CAN/CSA C22.2 No. 60950-1*,

 

CE Mark,

 UKCA
EMC: 

EN 55032/24 CE Emissions/Immunity, 

 UKCA
 

FCC 47 Part 15 Subpart B Class A

EMS: 

IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, 

 

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, 

 

IEC 61000-4-4 EFT: Power: 2 kV; 

 

  Signal: 2 kV (DC models), 

 

IEC 61000-4-4 EFT: Power: 1 kV; 

 

  Signal: 1 kV (AC models),

 

IEC 61000-4-5 Surge: Power: 2 kV; 

 

  Signal: 2 kV (DC models), 

 

IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 

 

  2 kV Line/Gnd; Signal: 2 kV (AC models),

 

IEC 61000-4-6 CS: Signal: 3 Vrms, 

 

IEC 61000-4-8 ( Magnetic Field) 30 A/m, 

 

IEC 61000-4-11 (Voltage Dips, interrupts)

IP Rating: 

IP20 Protection

* Pending

Page 13

Page 14

Summary of Contents for OmniConverter 10G









Reviews: