Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
Directive) of the European Community directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at [email protected].
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
Customer Support Information
If you encounter problems while installing this product, contact Omnitron Technical
Support:
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
38
Tesla
Irvine, CA 92618, USA
Email:
URL:
www.omnitron-systems.com
040-09190-001A 10/22
OmniConverter
®
10G/S
User Manual
Product Overview
The OmniConverter 10G/S are unmanaged 10G Ethernet multi-gigabit/multi-rate
media converters featuring one 1/10G SFP/SFP+ uplink port and one or two multi-
gigabit/multi-rate RJ-45 user ports.
The RJ-45 user ports support multi-gigabit/multi-rate speeds of 10Mbps, 100Mbps,
1Gbps, 2.5Gbps, 5Gbps and 10Gbps.
The OmniConverter 10G/S are standard Layer 2 Ethernet switches that forward
frames to any port based on their MAC address. The 10G/S supports frame sizes
up to 10,240 bytes.
Front Panel
The front of the module provides access to the RJ-45 ports and uplink ports.
RJ-45 and Uplinks Ports
The RJ-45 Ethernet ports support multi-gigabit/multi-rate speeds of 10Mbps,
100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps protocols, auto-negotiation and
auto MDI/MDI-X crossover.
The SFP transceiver receptacle port supports a variety of copper and fiber
transceivers. It supports 10/100/1000BASE-T, 1000BASE-T, 2.5BASE-T, 5GBASE-T
and 10GBASE-T copper transceivers and 1G and 10G multimode or single-mode
fiber, dual or single-fiber transceivers in standard, CWDM and DWDM wavelengths.
Front Panel Layout
Installation Procedure
1) Configure DIP-switches
2) Installing the Module
3) Apply Power
4) Connect Cables
5) Verify Operation
Page 3
Page 4
Summary of Contents for OmniConverter 10G
Page 8: ...Mechanical Page 15 Page 16...
