3.2
Wall mounting
A wall mounting kit with four mounting brackets is provided on delivery for mounting
TICRO 100
on flat
surfaces, for example on a wall.
Please observe the instructions included in the wall mounting kit for attaching the mounting brackets to
TICRO 100
. Proceed as follows:
1. At the desired mounting positions for the mounting brackets, remove two sealing plugs on the rear
side and two sealing plugs on the front side of
TICRO 100
.
2. Unscrew the four uncovered screws from
TICRO 100
.
3. Insert the four sealing rings included in the mounting kit to the mounting holes of
TICRO 100
.
4. Fasten the mounting brackets using the delivered 22 mm long screws as shown below.
5. Mount
TICRO 100
to the wall.
Remove 2 sealing plugs
from the mounting holes
on the rear side
Wall mounting kit
Remove 2 sealing plugs from the
mounting holes on the front side
TICRO 100
with mounting brackets
Mounting
OMICRON
15
