omi ESD 1300, Instruction And Maintenance Manual

Page: 12 / 122

Cod. 710.0159.01.00 Rev0A – 10.2011
8 - 275
6.1 Icons description
ICON DESCRIPTION
Generic Alarm
High / Low refrigerant discharge pressure Alarm (HP/LP)
Icon ON shows “Celsius degrees”
Icon OFF shows “Fahrenheit degrees”
Refrigerant compressor energized
(Blinking when start refrigerant compressor delay activated)
Suggested Maintenance
(Icon connected to CO14 parameter)
“Functions menu” activated
Icon connected to time parameters
(ON when in Functions or Programmation area)
6.2 Signalling Led description
SIMBOL STATUS DESCRIPTION BUTTON
ON Dryer energized
ON Circulator running
6.3 Buttons function
Single buttons function
SYMBOL DESCRIPTION
LED /
ICON
Activates or deactivates unit operation when pressed for 3 seconds (ON/OFF).
When deactivated, the OFF message is displayed.
When the dryer is switched off using this button all digital outputs are disconnected.
Allows entry the “Functions Menu”
Pressed during normal operation displays the compressor oil temperature.
When pressed during programming mode, it scrolls the parameters list or increases the displayed value.
Pressed during normal operating displays the refrigerant circuit suction pressure.
When pressed during programming mode, it scrolls the parameters list or decreases the displayed value.
Pushed and released shows on display the SET POINT value.
In programming mode selects a parameter or confirms a value.
Not Used
Buttons combinations
Enters the PARAMETER PROGRAMMING MENU
Exits the PARAMETER PROGRAMMING MENU