![background image](http://html1.mh-extra.com/html/omega/tcl-3m165e2-series/tcl-3m165e2-series_user-manual_4189795047.webp)
Series TCL-3M165E2
Testing process / Calibration
Technical changes reserved
- 47 -
Cancel testing process:
•
Push the button of the start / stop slider completely to the left.
The testing process is aborted and the calibrator gets programmed to
reach the temperature of the "Behavior at test end" (
p. 40) of the test task.
Display range:
The following information is shown in the display range:
Current temperature values of the reference used.
Current test point.
Probable remaining test duration for the current
test point.
Time and date.
Operating mode.
Type of data acquisition.
Functionality.
Reference used.
Control.
Status of reference and DUT.
After the testing process:
Allow the calibrator to cool to room temperature.
Note the instructions in the section "Test tasks" (
§ 3.3).
Clean the calibrator (
§ 8.2).