Series TCL-3M165E2
Operation
Technical changes reserved
- 33 -
Copy Function:
Tap on the
icon to copy the selected function.
A copy is created and the "Configure Function" window is opened.
From the parameter fields of this window, you can set the parameters of the new
function. Details can be found in the following section.
Delete Function:
On tapping the
icon, the selected function is immediately deleted.
Configure Function:
Tap on the
icon to edit the parameters of the selected function.
The "Configure Function" window is opened. Details can be found in the following
section.
5.4.3 Configure Function
From the "Manage Function" window, you can use the
icon to go to the window
"Configure Function".
Here, you can change the parameters of the selected
function.
Tap on the parameter field of the desired
parameter.
The parameter’s window is opened. You can
configure the parameter there.
Name :
You can change the name of the function here. After tapping, the virtual keyboard with the
input line is displayed.
Input the name of the function and confirm the input.
The new name is adopted and you will be returned to the previous window.
Serial number :
The parameter field of the serial number is disabled and cannot be edited.
Minimum temperature :
Input the new value in the input window and confirm the input.
The new value is adopted and you will be returned to the previous window.
Maximum temperature :
Input the new value in the input window and confirm the input.
The new value is adopted and you will be returned to the previous window.
Own adjustment values :
If required, you can save the corresponding adjustment values for your own measuring
inserts here. Further information on this can be found under "Adjustment" (
§ 8.4).
