Operation
Series TCL-3M165E2
- 42 -
Network settings:
Using the parameter fields of the window, you can
integrate the calibrator in your network.
First connect the calibrator with your network:
Insert one plug of a suitable network cable in the socket of the calibrator.
Insert the other plug of the network cable in a free socket of your network.
Now configure the calibrator for the network.
First set the network mode on.
"DHCP" = automatic assignment of the IP address.
"Manual" = Manual input of the IP address and subnet mask.
Select the desired mode by tapping in the selection list.
Confirm your selection with the
icon.
"DHCP": The IP address and subnet mask are requested from the network. The two
parameter fields are disabled.
In addition, for "Manual":
Input the IP address from the numeric keypad of the window and confirm the input with
the
icon.
Input the subnet mast from the numeric keypad of the window and confirm the input with
the
icon.
Date and Time:
Using the parameter fields of the window, you can
set the date and time of the calibrator, as well as change the
format of the date and time.
By tapping the respective parameter field, a window is opened for the input/change.
Upon confirming with the
icon, the input/change is adopted and you return to the "Date
and Time" window.
Display layout:
The depiction on the screen is changed using the
parameter fields in this window.
Upon tapping on the corresponding parameter field, the display on the screen is immediately
adjusted.
