Omega iServer Microserver User Manual Download Page 71

Page: 71 / 74

Appendix E

iLog Error Messages

Error # Description

Note

-8003

User stopped logging readings.

-10005

Failed to find the iServer.

Ethernet cable is disconnected,
iServer is powered off, connections
across the firewall require longer
“connection to socket time out”
setting.

-10006

Windows socket was closed.

-10007

Windows socket error.

Wrong IP or wrong Port number
was used.

-10008

The iServer failed to respond to a request.

Wrong IP or wrong Port number
was used.

-10011

Response came empty.

No data was sent.

-10012

Device responded with

Possibly the iLog is configured for

"Serial Time Out" string.

wrong product model.

-10014

Terminal Server Mode when the Port is 1000.

Try Port 2000 in iLog configuration.

-15100

Error on obtaining the temperature reading.

Possibly the iLog is configured for
wrong product model.

-15105

Error on obtaining the humidity reading.

Possibly the iLog is configured for
wrong product model.

-15110

Error on obtaining the dew point reading.

Possibly the iLog is configured for
wrong product model.

Summary of Contents for iServer Microserver











































































Search results

Summary of Contents for iServer Microserver

Reviews:

Related manuals for iServer Microserver

Brands by name

Popular brands

Omega iServer Microserver, User Manual

Search results

Summary of Contents for iServer Microserver

Reviews:

Related manuals for iServer Microserver

Brands by name

Popular brands