Omega iServer Microserver, User Manual

Page: 25 / 74

19
4.6 iServer Operation Basic Menus
4.6.1 Chart Descriptions
Figure 4.8 Chart Descriptions
A) Chart’s Title name decided by the user.
B) Experiment/Task’s Name decided by the user.
Refer to Section 4.7 Device/Configuration Page’s Descriptions and Setup for
editing the Chart’s Title and Experiment/Task’s Name .
C) Alarm Setpoint 1 or Alarm Setpoint 2 setup. Type in the desired values and hit enter
key, the square shape dot symbolizes the Alarm Status Indicator, which is normally
Black and will turn Red if the alarm is activated.
D) Digital Display of Dual Input channels, it can display in any engineering units
required. Blue for CH A in cyan color background and red for CH B in yellow color
background. In this example, it is the reading of frequencies of 2 Signal Generators.
To display your own-defined Unit, Refer to Section 4.7 Device/Configuration
Page’s Descriptions and Setup for editing and modification.
http://192.168.1.200
R & D Engr.Lab
SERVER HOME PAGE
5000 4000 SP1 SP2
Rate Monitor
Message:
10000 0
CH A: 3088 HZ CH B: 4561 HZ
A
SP1
B
SP2
AB
3088.0
Mon Nov 24 15:57:43 PST 2003 Mon Nov 24 15:24:05 PST 2003
Reset Latch A Reset Latch B Reset Timer
5000.0
4561.0
4000.0
0.0
1Minute(1Sec/Div)
a=Frequency ;b=0.0;c=3089;d=4559 ;e=Rate Monitor; f=HZ; g=101; h=5000;i4000;j=1;k=1;l=+;m=12:50:03 Nov,22 2003;
a=Frequency ;b=0.0;c=3092;d=4563 ;e=Rate Monitor; f=HZ; g=001; h=5000;i4000;j=1;k=1;l=+;m=12:50:04 Nov,22 2003;
a=Frequency ;b=0.0;c=3088;d=4561 ;e=Rate Monitor; f=HZ; g=101; h=5000;i4000;j=1;k=1;l=+;m=12:50:05 Nov,22 2003;
Applet pulse started
A
(BAR CHART)
J4 J3 J2 J1
K
G
F
B
D
C
E
H
L1 L2 L3
Bar