Omega iServer Microserver, User Manual

Page: 13 / 74

7
2.3 Parts of the iServer Unit
Figure 2.6 Parts of the iServer Unit
Table 2.1 Parts of iServer Unit
ETHERNET RJ45 interface for 10BASE-T connection.
RESET Button: Used for power reseting the iServer.
I/O Connections for Channel A and Channel B, Refer to Section 2.4 .
ACTIVITY LED (Red) Blinking: Indicates network activities (receiving or sending packets).
NET LINK LED (Green) Solid: Indicates good network link.
DIAG LED (Yellow and Green) Diagnostics: at boot-up they turn on for 2 seconds, then
turn off; DHCP: if DHCP is enabled, they blink and stay solid periodically
POWER LED (Green) Solid: Indicates Power-ON (for -W version only).
DC Power Supply Section:
+ Plus power supply wire connection (inside the plug for -W version).
- Minus power supply wire connection (outside the plug for -W version).
Reset Button
RJ45 interface
Power LED
dc Power Input
5 6 7 8
1 2 3 4
LEDs
LEDs
Reset Button
RJ45 interface
dc Power Input
I/O Connectors
Channel A
Channel B
1 2 3 4 5 6 7 8
Mounting
Tabs