4.3.5 Configure Access Control
This section describes the "Access Control" page of the iServers’s Web interface. This
page allows the users to set up the network and security parameters of the iServer.
At the initial entrance to the “Access Control” page you will be prompted for the LOGIN
Password (see
Figure 4.6
) prior to an ADMINISTRATOR Password.
Figure 4.13 Access Control
Login Password:
This allows users to access and modify all of the iServer Home Page
menu items, except “Access Control”, which requires an Administrator password. The
default Login password is
12345678
. This password can be up to 16 alpha-numeric
case-sensitive characters.
If there is no Login Password assigned (blank box) the iServer will not require a
password to access and modify iServer Home page menu items.
Admin (administrator) Password:
This allows users to access and modify the "Access
Control" page. The default password is
00000000
. This password can be up to 16 alpha-
numeric case-sensitive characters.
If there is no Administrator Password assigned (blank box) the iServer will not require
password to access and modify "Access Control" page.
Web Server:
This will allow or disallow accessing the iServer’s Web server using an
Internet browser (default is enabled.)
Host Name:
Refer to
Section 3.4
, DNS.
MAC Address:
This is also called Hardware address or Ethernet address, which is
assigned to the iServer at production. The MAC (Media Access Control) address is the
iServer’s unique hardware number and is not changeable.
ACCESS CONTROL
ACCESS CONTROL
http://192.168.1.200
Address
Main Menu
Login Password 12345678
Admin Password 00000000
IP Address 192.168.1.200
Gateway Address 0.0.0.0
Subnet Mask 255.255.255.0
MAC Address 00:03:03:00:21:D9
Web Server enable
Host Name eis21d9
Save Reset
Power Recycle
26
