![background image](http://html1.mh-extra.com/html/omega/iserver-microserver-eis-2b/iserver-microserver-eis-2b_user-manual_4061530008.webp)
PART 1
INTRODUCTION
1.1 Safety and EMC Considerations
Refer to the CE Approval Section
EMC Considerations
•
Whenever EMC is an issue, always use shielded cables.
•
Never run signal and power wires in the same conduit.
•
Use twisted-pair wires for signal connections.
•
Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems persist.
Failure to follow all instructions and warnings may result in injury!
1.2 Before You Begin
Inspecting Your Shipment:
Remove the packing slip and verify that you have received
everything listed. Inspect the container and equipment for signs of damage as soon as
you receive the shipment. Note any evidence of rough handling in transit. Immediately
report any damage to the shipping agent. The carrier will not honor damage claims
unless all shipping material is saved for inspection. After examining and removing the
contents, save the packing material and carton in the event reshipment is necessary.
Customer Service:
If you need assistance, please contact the Customer Service
Department nearest you.
Manuals, Software:
The latest Operation Manual as well as free configuration software
(
iConnect
), datalogging software (
iLog
), and
Mail Notifier
are available at
the website
listed on the cover page of this manual or on the CD-ROM enclosed with your
shipment
.
2