7
2.3 Parts of the iServer Unit
Figure 2.5 Parts of the iServer Unit
Table 2.1 Parts of iServer Unit
SERIAL
DB9 male (DTE Configuration) or 2, four position connectors
for RS232 / RS485 connections
ETHERNET
RJ45 interface for 10BASE-T connection.
RESET
Button: Used for power reseting the iServer.
ACTIVITY
LED (Red) Blinking: Indicates network activities (receiving or sending packets).
NET LINK
LED (Green) Solid: Indicates good network link.
TX
LED (Yellow) Blinking: Indicates transmitting data to the serial port.
RX
LED (Green) Blinking: Indicates receiving data on the serial port.
POWER
LED (Green) Solid: Indicates Power-ON.
DC Power Supply Section:
+
Plus power supply wire connection (inside the plug for -W).
-
Minus power supply wire connection (outside the plug for -W).
ACTIVITY
NETWORK LINK
TX-TRANSMIT
RX-RECEIVE
RS-232 / RS-485
SERIAL
RX TX LINK ACT
Mounting Bracket
