![background image](http://html1.mh-extra.com/html/omega/isd-th/isd-th_user-manual_4178677032.webp)
26
4.4.3.3 Sensors
This page is where the Sensor Parameters are defined. Reading 1 is for Temperature,
Reading 2 is for Humidity, and Reading 3 is for Dewpoint.
Figure 4.17 Configuration Menu: Sensors
Description –
This can be a name for the sensor or where the sensor is located. This
field is text only and can have up to 16 alphanumeric characters. This description will
appear wherever Reading 1, 2 or 3 is displayed on the web server.
Unit –
This is the unit of measurement for temperature. It can be either C for Celsius or F
for Fahrenheit.
Once the unit is selected, either
C
o
r F
, it will be a global change throughout the
web server, as well as on the LCD display. If you use the front
C/F
buttons to
change the unit of temperature it will have no affect on the web pages.
Display –
If checked the variable (i.e. Temperature1) will be displayed on the Readings
and Chart applets as well as data transmission in Continuous mode (see Server Type
Section 4.4.3.2
). The default is
checked
.
http://192.168.1.200
Address
Sensors
Readings
Chart
Web Link
Setup
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Save Changes
Reset
Sensors
Server
Alarm Relays
Contact Closures
Date and Time
Description
End Character 0x
C
Temperature 1
Reading 1
Unit
Display
Data Format
Offset
Offset
Adjust by
Offset
Adjust by
0D
Description
End Character 0x
Humidity
Reading 2
0D
Description
End Character 0x
Dewpoint
Reading 3
0D
T000.0C
%
Unit
Data Format H00.0%
C
Unit
Data Format D000.0C
Samplng Rate
One Sample per
10 seconds
0.0
Reading Low 0.0
Reading High 100.0
Ref. Low 0.0
Ref. High 100.0
Display
Offset
Display
0.0
Reading Low 0.0
Reading High 100.0
Ref. Low 0.0
Ref. High 100.0