36
4.4.6 Recording
This section includes all the parameters and settings for data recording, SD flash card
and recording status, data retrieval, and formatting the SD card. Fields are described
below.
4.4.6.1 Start Recording
Figure 4.23 Recording Menu: Start Recording
Interval –
This is the time interval between each data. It can be between
1
to
3600
seconds.
Title –
This is the header for each recorded data file on the SD flash card.
Quick Start Recording –
If this button is clicked recording will start immediately.
Make sure your Current Date and Time are correct.
Type –
The options are
Wrap
and
Non-Wrap
.
If
Wrap
is selected once the SD flash card is full the iServer will delete the old data
stored on the card in order to record the new data. Each time a new recording takes
place an old record will be deleted.
If
Non-Wrap
is selecetd the iServer will stop recording once the SD flash card is full.
http://192.168.1.200
Address
Start Recording
Readings
Chart
Web Link
Setup
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Format SD Card
Start Recording
Status Data Retrieval
Interval
(1-3600)seconds
yyyy/mm/dd
yyyy/mm/dd
Start Time
Stop Time
Start Date
Stop Date
hh:mm:ss(24 hours)
hh:mm:ss(24 hours)
Set Date and Time
Mon
Tue
Wed
Thur Fri Sat Sun
Set Weekdays (only for scheduled recording)
Current Date:
2099/01/01
(yyyy/mm/dd) Current Time:
00:00:00
Continuous
Category
Wrap
Type
Quick Start Recording
Title
Start Recording