![background image](http://html1.mh-extra.com/html/omega/isd-th/isd-th_user-manual_4178677011.webp)
5
2.2 Wall Mounting
Position unit where required. Mark and drill the two #4 screw holes.
After bracket is mounted on the wall, align back of unit over the three bracket clips, once
engaged, slide downward, the unit will snap in place.
Figure 2.2 Wall Mounting
It is recommended that you ground your unit by connecting a wire to the
Return/Ground position of the relay connector, see
Figure 2.6
.
14.9 [0.59]
46.1 [1.81]
38.1 [1.50]
130.2 [5.13]
38.1 [1.50]
6.1 [0.24]
23.8 [0.94]
88.1 [3.47]
34.4 [1.36]
REAR WIRE
ENTRY AREA
ADDITIONAL MOUNTING OPTION-
TO RETAIN UNIT TO MOUNTING BRACKET
USE #4 X 1/4" LONG SELF-TAPPING SCREW
DRILL 3.17 [0.125]
USE TWO, #4
FLAT HEAD SCREWS
TO MOUNT BRACKET
UNIT OUTLINE
CLIPS (3)
29.5 [1.16]
Dimensions are in mm
with inches in [ ].