Optional 2nd Channel and 3rd Channel Output
Page - 12
“panic”, “arm/lock” or “disarm/unlock” button. When turning off Panic mode from the
transmitter, pressing “arm/lock” to stop Panic will leave the system armed with locked
doors, and pressing “disarm/unlock” will leave the system disarmed with unlocked doors,
and pressing “panic” will leave the system in the same arm/disarm state it was in before
Panic was activated, and not lock or unlock the doors.
Optional 2nd Channel Output (Trunk Release): If your vehicle is equipped with
electric trunk release, your installing dealer can configure your system to perform trunk
release from your transmitter. Use of the 2nd channel output is recommended to operate this
option; simply press and hold the transmitter’s “channel 2” button for 2.5 seconds. Your
vehicle will respond by releasing the trunk lid or rear hatch, chirping the siren twice, turning
on your parking and interior lights for 30 seconds, unlocking the doors, and disarming the
system if it was armed. The trunk release will not operate with the ignition switch "on"
unless the vehicle's door is open. If desired, the security system can be programmed to
remain armed when this feature is used.
Optional 3rd Channel Output: This output's operation is similar to the 2nd channel.
To operate it, press and hold the transmitter’s “arm/lock” or “disarm/unlock” buttons
together for 2.5 seconds to activate the 3rd channel output. The 3rd channel output will
operate regardless of the ignition switch being "on" or "off", and there is no audible or visual
confirmation.