active arming from the transmitter, Last Door Arming, and Automatic Rearming. When
programming, please note that pressing the remote transmitter's “arm/lock” button sets
the 3 second arming delay, and pressing the “disarm/unlock” button sets the 45 second
delay.
#19 Steady Siren or Pulsed Horn Output: Default Steady Siren. This feature allows
the choice of using the electronic siren for the audible output of the security system or the
vehicle's horn. When programmed for use with a vehicular horn, this output pulses for 10
seconds, then pauses for 5 seconds, repeating this cycle for the duration of the activated
alarm period. When set for use with the electronic siren, the output is continuous and
steady. When programming, please note that pressing the remote transmitter's “arm/lock”
button sets the pulsed horn, and pressing the “disarm/unlock” button sets the steady siren.
#20 Loud or Soft Confirmation Chirps: Default Loud. If the system is configured to
use the vehicle's horn, this feature allows a degree of compensation for the variance which
is found in the length of the pulse required to chirp the vehicle's horn in a satisfactory
manner. When programming, please note that pressing the remote transmitter's “arm/
lock” button sets the chirp loud, and pressing the “disarm/unlock” button sets the chirp
soft. This feature is only available for use when the previous feature is programmed for
the "Pulsed Horn" setting.
#21 Total Closure Lock Output: Default OFF. If the vehicle is has an existing total
Page - 32
