Red LED Status Light
The LED Status Light is a visual indication of what state the security system is in at any
given time. The LED Status Light is normally positioned in a location that is easily observed
by the driver. These are the possible conditions that the security system can be in as reflected
Page - 16
Override factory setting of "stage #1, one valet switch press and stage #2, no valet switch
press" is present, simply pressing the valet switch once within 10 seconds of turning the
ignition switch "on" will override and disarm the system.
by the LED Status Light:
1) Off
= The security system is disarmed and not performing any automatic
functions.
2) On Constant
= The security system is in the Valet Mode.
3) Flashing Slow
= The security system is armed.
4) Flashing Fast
= The 30 second Last Door Arming feature or 90 second Automatic
Rearming feature is in progress.
Zone Violation: If the system is triggered, the LED Status Light will start to flash and
pause one of the following sequences to indicate which protected circuit triggered the
system. This is seen while the system is armed, and after disarming, until the ignition switch
is turned "on", which will clear the Zone Violation code. The unit's memory can store two
different violation codes.
