Page - 24
The Excalibur comes with two pre-programmed transmitters, but as many as four may
be used to operate the system. Each transmitter has its own unique and ever-changing digital
“code”, which is programmed to operate the system by a special “learning” procedure.
When adding transmitters to operate the security system, all previous transmitter codes are
deleted, so all transmitters which are to operate the system must be programmed at the same
time. To program transmitters, follow this process:
1) Have all transmitters which are to operate the system at hand. Turn the ignition “on”.
2) Within 5 seconds of turning on the ignition, press the Valet Switch 5 times. The siren will
briefly sound, confirming that for the next 10 seconds the system is ready to learn a
transmitter code. To enter a transmitter code, simply press and release the transmitter’s
“arm/lock” button (the button which is designed to arm the system). When the first
transmitter code is learned all existing stored transmitter codes will be erased.
3) Press the “arm/lock” button on each remaining transmitter. The system will chirp the
siren once to confirm that each transmitter code was learned. The other three transmitter
button's functions will automatically be assigned when the “arm/lock” button is learned.
If a code is not received within a 10 second period, the learning process will automatically
terminate, as indicated by another siren burst.
How To Program Transmitters
