background image

When the vehicle's last door is closed the siren will chirp once, the parking and interior

lights flash once and the LED Status Light will begin to flash rapidly.  Thirty seconds later
the siren will chirp and the lights will flash again, the doors will lock (which is separately
programmable) and the LED Status Light will slow to a steady flash, confirming that the
security system is fully armed.  If a point of entry is reopened before the single siren chirp
at 30 seconds, the Last Door Arming process stops, and will reset to start over when the point
of entry is again closed.  All protected entries must be closed to initiate the Automatic Last
Door Arming sequence.  Automatic Last Door Arming offers a high level of security, since
you do not have to remember to arm the security system every time you leave the vehicle,
and may entitle you to an insurance discount (please check with your agent or carrier).

To temporarily prevent the system from automatically Last Door Arming, you have

these options: put the system in Valet Mode (page 13-16), leave the door open, or, in most
cases turning on the dome light may cause the system to detect that your door is still open.
Leaving the ignition key turned "on" is not recommended.

While the security system is armed, the LED Status Light is always flashing.  Should any

intrusion attempt occur, the system will instantly "trigger", and once triggered, will respond
by sounding the electronic siren; flashing the parking and interior lights on and off; and
relocking the doors
 when the system is first triggered.  Should a door be opened, the system
will wait until the door is closed, and at that time relock the doors so that a thief cannot easily
regain entry to the vehicle.

Security System Armed, & Triggered

Page - 8

Summary of Contents for Excalibur ATV-1000



































Reviews: