background image

128-8122

1 of 12

Page 1

Model APS-787a

Owner's Manual

5 Button Remote Start Security System With

Plug-In Shock Sensor & Starter Disable

FEATURES:

 2 Five Button Programmable RF Transmitters

 Seven Channel Code Learning Receiver (capable of accepting 4 transmitters)
 Code Hopping Technology

 Selectable Manual Override Mode

 Remote Panic in all modes

 Protected Valet/Override
 Combination Remote Start Safety Control/Valet/Programming Push-Button LED

   Switch

 Selectable Automatic Timed Start Mode

 User Programmable Manual Override Code

 7 Function LED - Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming
 Intrusion Alert with Memory

 Audible Arm / Disarm / Defective Zone / Tamper Confirmation

 Instant Siren Activation All Entry Points

 Starter Disable When Armed
 True Last Door Arming

 Defective Zone By-Pass

 Active or Passive Arming Selectable

 Programmable Auto Lock On / Off

 Programmable Auto Unlock / Off/Drivers Door/All Doors
 Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L
 Channel 4, 5, 6, & 7 Output to Control Optional Accessories
 Programmable Active or Passive Door Locks

 User Programmable Permanent Chirp Delete
 On Command RF Chirp Delete from Transmitter Or Selectable Through Software

 6 Tone Multi Tone Siren

 Car Horn Activation for additional alarm response

 Additional Negative Trigger Input
 RF Inhibit with ignition on

 Parking Light Flasher

 Remote Keyless Entry With Optional Access Guard (must have power door locks)

 Illuminated Entry
 Plug In Dual Stage Shock Sensor

OPTIONS :
      

 

 Telematic Upgrade Ready

  

 Plug In Flash Logic By-Pass Capable
 Remote Trunk Release (must have electronic trunk release)

 Multiple Vehicle Capable

 Remote Power Window Roll Up

 Remote Garage Door Interface
 Multiple Vehicle Capable

CAUTION !

Be certain that the vehicle is outdoors before using this or any remote vehicle

starting device.  A running engine produces dangerous carbon monoxide fumes

which can be harmful or fatal if prolonged exposure occurs.  DO NOT remote

start the vehicle if it is garaged.

From APS787 Change Transmitters to 07SP 05/07

Summary of Contents for Platinum APS-787a













Reviews: