![background image](http://html2.mh-extra.com/html/omega/dp25b-s/dp25b-s_user-manual_4041729016.webp)
2
About The Meter
6
METER BUTTONS
SETPTS
Button
In the Run Mode, this button will sequentially recall the previous setpoint settings. As
necessary, use the
/NT/GRS
and
/TARE
buttons to alter these settings, then press
the
SETPTS
button to store new values.
Unless you press the
SETPTS
,
/TARE
, or
/NT/GRS
button within 20 seconds, the
meter will scroll to setpoint 2 and then to the Run Mode.
If the dual relay option is not installed or if
L.3=1
is displayed on the
LK.CF
menu, pressing the SETPTS button will display the meter's firmware version.
/NT/GRS
Button
In the Run Mode, this button will toggle between net/gross readings or peak readings
depending upon setup.
In the Configuration Mode, press this button to change the value of the flashing digit
shown on the display and/or toggle between menu choices, such as
R.1=R
or
R.1=N
on
RD.CF
menu. When configuring your setpoint values, press the
/NT/GRS
button to
advance the flashing digit's value from 0 to 9 by 1.
/TARE
Button
In the Run Mode press the
/TARE
button to tare your reading (zeroing).
In the Configuration Mode, press the this button to scroll to the next digit.
Note
☞
Summary of Contents for DP25B-S
Page 10: ...Notes viii...