4
Configuring The Meter
22
4.2 SELECTING A DECIMAL POINT POSITION
DEC.P
Refer to
Table 6-1
for a summary list of menu configuration.
To select a decimal point display position, follow these steps:
1.
Press the
MENU
button until the meter shows
DEC.P
.
2.
Press the
∂
TARE
button. The meter shows one of the following:
•
FFF.F
•
FF.FF
•
F.FFF
•
FFFF
(Default)
3.
Press the
ß
NT/GRS
button to scroll between available choices.
4.
Press the
MENU
button to store your choice. The meter momentarily shows
STRD
,
followed by the next menu
RD.S.O
(Reading Scale and Offset). Or you can press
the
RESET
button to abort and go back to the
DEC.P
menu.
4.3 SELECTING READING SCALE AND OFFSET
RD.S.0
Refer to
Table 6-1
for a summary list of menu configuration.
To scale the meter to show readings in engineering units. There are two methods. One
method is to scale with known inputs. Another method is to scale without known inputs:
you calculate input values based on the transducer specifications and manually enter
them through the keyboard.
Note
☞
Note
☞
Summary of Contents for DP25B-S
Page 10: ...Notes viii...
