4
Configuring The Meter
30
4.5 SELECTING A DISPLAY COLOR
COLR
Refer to
Table 6-1
for a summary list of menu configuration.
Selecting Display Color is not active unless your meter is a Version “B”.
To select a display color, follow these steps:
1.
Press the
MENU
button until the meter shows
COLR
.
2.
Press the
∂
TARE
button. The meter shows one of the following:
•
GRN
•
RED
•
AMBR
3.
Press the
ß
NT/GRS
button to scroll between available choices.
4.
Press the
MENU
button to store your choice. The meter momentarily shows
STRD
, followed by the next menu
S1.CF
(Setpoint 1 Configuration). Or you can
press the
RESET
button to abort and go back to the
RD.CF
menu.
4.6 USING SETPOINT 1 CONFIGURATION
S1.CF
Refer to
Table 6-1
for a summary list of menu configuration.
Setpoint 1 Configuration
S1.CF
is not active unless your meter has dual relay output
capabilities. The LED's will display whether the
S1.CF
is active or not. You may use
Setpoint 1 Configuration
S1.CF
for the following:
•
To set the setpoint's active band above or below your chosen value
•
To select whether the setpoint operation is latched or unlatched
•
Assigning setpoint values to the net or gross reading
Note
☞
Note
☞
Summary of Contents for DP25B-S
Page 10: ...Notes viii...
