The RC mode super control panel will be displayed.
A Mode
P
250 F5.6
TTL
Manual
Off
+5.0
TTL
+3.0
1/8
–
Low
1
Ch
1023
1:02:03
A Mode
P
250 F5.6
TTL
Manual
Off
+5.0
TTL
+3.0
1/8
–
Low
1
Ch
1023
1:02:03
1
2
3
5
4
6
Supported flash control modes
Group
Flash compensation
Flash mode
Optical signal strength
Channel
1
2
3
4
5
6
Press the OK button.
The standard LV super control panel can be displayed by pressing the INFO button. The
display will change each time the INFO button is pressed.
Adjust flash settings.
Highlight items using the
FGHI
buttons and rotate the front dial to choose settings.
Group
Choose a group. Changes to settings apply to all units in the selected
group. Choose
8
to adjust settings for the unit mounted on the camera.
Supported
flash control
modes
Choose a flash mode.
Flash
compensation
Adjust flash output. When MANUAL is selected for flash mode, you can
choose a value for manual flash output.
Optical signal
strength
Choose the brightness of the optical control signals emitted by the flash
units. Choose [HI] if you have placed flash units at close to the maximum
distance from the camera. This setting applies to all groups.
Flash mode/
flash level
Choose
A
(standard) or FP (super FP). Choose super FP for shutter speeds
faster than the flash sync speed. This setting applies to all groups.
Channel
Choose the channel used for flash control. Change the channel if you
find that other light sources in the area are interfering with remote flash
control.
435
Optional Accessories
3.
4.